Choosing the wrong kind of LED track lights for your store could cost you a lot of money, so it’s important to get it right the first time.If you do it right, your products will look better, which will help your sales. Getting the wrong kind of lighting can be a double whammy since lighting makes up a big part of your electricity bill and can hurt you for years if you make a mistake.The mains-powered track is better than the low voltage (12 volts) for shops and stores. This is because you don’t have to pay for transformers, there are more fittings available for commercial use, and, perhaps surprisingly, you can save more energy and money with a mains-powered track.LED is the word of the moment when it comes to lights. Thus, LED track lights technology is improving quickly, but it will still be a while before LED track lights with enough light output to use in commercial settings and low enough prices to buy is made. Maybe next year, but only if your desire to be green is stronger than your desire to save money on installation!
What kind of LED track light do you use?
Metal halide lighting has the best mix of power, light quality, and the ability to save energy. Each installation is different, but as a general rule, metal halide lighting is the best choice. The mix of gases inside the bulb is called “metal halide.Looking at the ceilings of most high-end stores, especially those that sell clothes, jewelry, and other expensive items, you may see small boxes attached to the fittings. These boxes hold the ballast that metal-halide bulbs need to work.The most cost-effective way to light would be with compact fluorescent bulbs. This is the technology behind the spiral and tube-shaped energy-saving light bulbs you will probably have in your home.It’s also the same technology that tube lights use, cheap to run, and good for lighting a large area.In between would be halogen. Great light, easy to use, flexible, and can be turned down. If you use halogen, I suggest bulbs with big reflectors, like the ES111. This is because this greatly affects how much light comes out and how wide the beam is.The “111” means that the face of the bulb is 111mm wide, which is more than twice as big as a typical halogen bulb used in a home.Best quality of LED track lights is available in bulk by visiting hyundailedlights for the best use of indoor and outdoor areas of house.
How many light fixtures do you need?
In general, you want to point your lights at the things you want to light up (obvious, right?!), so if you have ten shelving units, you need ten light fittings to do the job. But for a more accurate calculation, ask your supplier to put your store’s length, width, and height into their lighting calculation program.They will make a diagram that shows how many lights you need, where the light will go, and any places that need more light.
- You need the actual track.Connectors (straight, flexible, T, etc) are important.You will also need a “Feed-In,” a way to get power from your main point to the track itself. You can do this with a simple Feed-In that fits into the end of the track run, or if it’s easier, you can use a Connector/Feed-In that connects two pieces of track and gives you a place to plug in power.End Caps to “close” the run of the track; this is just a simple plastic cap.The fixtures and bulbs for the lights.
LED track lights are much better than regular lights in every way. Thus, LED track lights use much less energy than regular bulbs. You can even change how the different light sources in the area shine. This is a huge improvement over the usual lighting.Also, LED lights are much more focused, so they light up your rooms better. You can spread the light more if you choose an LED with a dimpled lens. Many homes are lit from the roof or ceiling, which makes the furniture in the room cast shadows. But LED track lights solve this problem by making every part of the room look more interesting.